ClearNav Instruments

ClearNav Variometer => CNv Discussion => Topic started by: S6 on June 20, 2019, 09:52:15 AM

Title: SCREEN
Post by: S6 on June 20, 2019, 09:52:15 AM
Lately when my display switch from thermal assistant screen to cruise screen it flashes a few time. After that it is ok. Just annoying for now.
Any solution to this?

Gilles
Title: Re: SCREEN
Post by: Evan Ludeman / T8 on June 20, 2019, 11:18:14 AM
I've never encountered this, so my guess is some sort of hardware issue.  Double check all electrical connections, make sure you aren't dropping a lot of voltage in a crummy circuit breaker, etc... if problem persists, call Rex....
Title: Re: SCREEN
Post by: SteveB_Z5 on June 20, 2019, 04:31:50 PM
I have this same thing when I make a 180 degree turn.  Several flashes as if the CN display is thinking I'am about to thermal.  It might not do it all the time.  Has done it in 2 different gliders (2 different ADC's) so I don't think it's a power issue.

Steve
Title: Re: SCREEN
Post by: Evan Ludeman / T8 on June 20, 2019, 05:19:33 PM
Hmmmm.  If someone can get a video illustrating this, I will forward. 
Title: Re: SCREEN
Post by: Jared on June 21, 2019, 07:50:17 PM
Yep,  Mine has done this too for as long as I can remember
Title: Re: SCREEN
Post by: Evan Ludeman / T8 on June 22, 2019, 06:54:28 PM
I must not be looking when this happens.  That's actually believable if it only happens on the transition from climb to cruise. 
Title: Re: SCREEN
Post by: Evan Ludeman / T8 on July 15, 2019, 11:02:00 AM
CNv developer says this problem is indeed real and has been fixed (code release pending...).