Author Topic: Format for USB Stick  (Read 1619 times)

dcmarotta

  • Newbie
  • *
  • Posts: 38
Format for USB Stick
« on: January 07, 2015, 12:12:24 PM »
Hi Evan,


Is there a particular format required for the Sandisk Cruzer which will be connected to the CNvXC?  FAT16, FAT32, NTFS?  Just received the stick and expect my vario tomorrow or Friday.


Thanks
Dan
LAK-17a
5J

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1108
Re: Format for USB Stick
« Reply #1 on: January 07, 2015, 01:27:09 PM »
FAT32... which is the way they come afaik.  I have never had to format a USB.
Evan Ludeman / T8

eyefly

  • Newbie
  • *
  • Posts: 18
Re: Format for USB Stick
« Reply #2 on: November 18, 2017, 12:11:01 PM »
I tried many different USB thumbdrives and could get most to write a flight recording from the CNII.  However to get the CNII to boot up and go into the data update screen it was very particular.  I tried old and new sticks, and several models of SanDisk Cruzers. I tried FAT and FAT32 formatting. 

Nothing seemed to get the CNII to start the data update screen, unless the root of the drive had a file named "ClearNavUpdater.cnx".

Is that just a coincidence? or is the "ClearNavUpdater.cnx" file needed?

Chris

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1108
Re: Format for USB Stick
« Reply #3 on: November 20, 2017, 12:09:40 PM »
That file is required because that's the executable that does the updating...
Evan Ludeman / T8

eyefly

  • Newbie
  • *
  • Posts: 18
Re: Format for USB Stick
« Reply #4 on: November 20, 2017, 02:32:21 PM »
Thanks I'm not sure I've seen that documented anywhere or mentioned elsewhere.

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1108
Re: Format for USB Stick
« Reply #5 on: November 20, 2017, 03:35:50 PM »
(You're welcome).  One reason we have this user forum!   
Evan Ludeman / T8

colton

  • Newbie
  • *
  • Posts: 1
Re: Format for USB Stick
« Reply #6 on: April 23, 2018, 09:35:23 PM »
I have the ClearNav I, not the II.  Is the ClearNavUpdater.cnx also needed for the USB or is the ClearNavUpdater.exe (in the ClearNav I facory USB download on the web site sufficient?

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1108
Re: Format for USB Stick
« Reply #7 on: April 24, 2018, 06:05:44 AM »
I have the ClearNav I, not the II.  Is the ClearNavUpdater.cnx also needed for the USB or is the ClearNavUpdater.exe (in the ClearNav I facory USB download on the web site sufficient?

The software for CN1 and CN2 is different but the general concept is the same.  Use the updater packaged with the CN1 USB (see downloads page if you need it).
Evan Ludeman / T8