Author Topic: flarm  (Read 377 times)

S6

  • Jr. Member
  • **
  • Posts: 65
flarm
« on: May 04, 2018, 04:33:50 AM »
Hi
As usual I am lost when it comes to electronics.
I have a CNv analog connected to a Oudie 2 with Paul R cable.
Can I connect a power flarm core to the Oudie 2 to serve as a display and keep the
Oudie 2 connected  to my vario or do I have to add a display for the flarm?
Which I am trying to avoid. To many display.
Or is there another way to do this?
Thank you
Gilles

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1129
Re: flarm
« Reply #1 on: May 04, 2018, 12:50:20 PM »
As far as I know, you can do this.  I don't use Oudie and I try not to support Flarm :-).

Evan Ludeman / T8

S6

  • Jr. Member
  • **
  • Posts: 65
Re: flarm
« Reply #2 on: May 04, 2018, 04:34:36 PM »
Thank you for your answer,  but why not support Flarm if I may ask?
Gilles

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1129
Re: flarm
« Reply #3 on: May 05, 2018, 08:11:53 PM »
There are limits to my volunteerism.

Evan Ludeman / T8

Joe G

  • Newbie
  • *
  • Posts: 3
Re: flarm
« Reply #4 on: May 06, 2018, 05:14:33 AM »
That's ashamed as there are plenty of us with less experience and knowledge that could learn from those with.
If someone shares their opinion it should be taken as just that, an opinion. I've  been considering installing Flarm.  Would love to hear the +% - opinions.

I listened to allot of negative comments about the clearnav II..... and now I happily own two of them.
« Last Edit: May 06, 2018, 05:18:28 AM by Joe G »

Chris Hostettler

  • Full Member
  • ***
  • Posts: 196
  • One more climb :-)
Re: flarm
« Reply #5 on: May 07, 2018, 02:24:40 AM »
Dear friends
Odie and Flarm are 3rd party devices which can be connected to ClearNav devices.
Connection issues involving CN devices would be a topic for this forum.
Support for connections between 3rd party devices would be a waste of CN resources which I prefer to be available for their own products ;-)
happy flying
Chris
Chris Hostettler
VH-XCH
CH

S6

  • Jr. Member
  • **
  • Posts: 65
Re: flarm
« Reply #6 on: May 07, 2018, 04:57:16 AM »
For all interested.
I am trying to do the best with what I have.
I found that if you use a K6 mux 4 plexer you can have  both devices connected to the CNv.
Gilles