SCREEN

[S6]

Lately when my display switch from thermal assistant screen to cruise screen it flashes a few time. After that it is ok. Just annoying for now.
Any solution to this?

Gilles

[Evan Ludeman / T8]

I've never encountered this, so my guess is some sort of hardware issue.  Double check all electrical connections, make sure you aren't dropping a lot of voltage in a crummy circuit breaker, etc... if problem persists, call Rex....

[SteveB_Z5]

I have this same thing when I make a 180 degree turn.  Several flashes as if the CN display is thinking I'am about to thermal.  It might not do it all the time.  Has done it in 2 different gliders (2 different ADC's) so I don't think it's a power issue.

Steve

[Evan Ludeman / T8]

Hmmmm.  If someone can get a video illustrating this, I will forward. 

[Jared]

Yep,  Mine has done this too for as long as I can remember

[Evan Ludeman / T8]

I must not be looking when this happens.  That's actually believable if it only happens on the transition from climb to cruise. 

[Evan Ludeman / T8]

CNv developer says this problem is indeed real and has been fixed (code release pending...).