Author Topic: SCREEN  (Read 303 times)

S6

  • Jr. Member
  • **
  • Posts: 77
SCREEN
« on: June 20, 2019, 09:52:15 AM »
Lately when my display switch from thermal assistant screen to cruise screen it flashes a few time. After that it is ok. Just annoying for now.
Any solution to this?

Gilles

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1200
Re: SCREEN
« Reply #1 on: June 20, 2019, 11:18:14 AM »
I've never encountered this, so my guess is some sort of hardware issue.  Double check all electrical connections, make sure you aren't dropping a lot of voltage in a crummy circuit breaker, etc... if problem persists, call Rex....
Evan Ludeman / T8

SteveB_Z5

  • Jr. Member
  • **
  • Posts: 93
Re: SCREEN
« Reply #2 on: June 20, 2019, 04:31:50 PM »
I have this same thing when I make a 180 degree turn.  Several flashes as if the CN display is thinking I'am about to thermal.  It might not do it all the time.  Has done it in 2 different gliders (2 different ADC's) so I don't think it's a power issue.

Steve

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1200
Re: SCREEN
« Reply #3 on: June 20, 2019, 05:19:33 PM »
Hmmmm.  If someone can get a video illustrating this, I will forward. 
Evan Ludeman / T8

Jared

  • Newbie
  • *
  • Posts: 32
Re: SCREEN
« Reply #4 on: June 21, 2019, 07:50:17 PM »
Yep,  Mine has done this too for as long as I can remember

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1200
Re: SCREEN
« Reply #5 on: June 22, 2019, 06:54:28 PM »
I must not be looking when this happens.  That's actually believable if it only happens on the transition from climb to cruise. 
Evan Ludeman / T8

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1200
Re: SCREEN
« Reply #6 on: July 15, 2019, 11:02:00 AM »
CNv developer says this problem is indeed real and has been fixed (code release pending...).

Evan Ludeman / T8