Author Topic: CN to CNv connection.  (Read 3212 times)

0 Members and 1 Guest are viewing this topic.

Doron neumann

  • Jr. Member
  • **
  • Posts: 54
CN to CNv connection.
« on: September 03, 2013, 12:33:17 PM »
Hi,
I have made the cable by the instructions and connected the CN with the CNv when the last CNv update came on.
Got the small "c" in the wind box, by the flarm "f" sign, and was happy.
Since then, I can not make it happened again.
I did:
1-Start the CNv before the CN.
2-Switched the flarm and CNv connectors between the two 6 pins sockets of the CN connecting board, and in both cases the flarm connects and the CN doesn't.
3-checked the cable with circuit tester and all three wires are connected as they should.
What next?

(Our autumn competition starts tomorrow, I am flying with the CN and Oudie. We let you guys know which was more helpfull)
Thanks,
Doron
Doron Neumann
DG808s
Israel

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1203
Re: CN to CNv connection.
« Reply #1 on: September 05, 2013, 07:38:29 AM »
My guess: you don't have latest XC preview software on CNv and the comm features expired.

Evan Ludeman / T8

Doron neumann

  • Jr. Member
  • **
  • Posts: 54
Re: CN to CNv connection.
« Reply #2 on: September 09, 2013, 06:47:44 AM »
Thank you Evan,
Make sense, will reload it and see.
will let you know.
Doron
Doron Neumann
DG808s
Israel

Doron neumann

  • Jr. Member
  • **
  • Posts: 54
Re: CN to CNv connection.
« Reply #3 on: October 06, 2013, 05:43:41 AM »
As Evan have sugested, problem solved after reloading.
Thanks,
Doron
Doron Neumann
DG808s
Israel