Author Topic: display  (Read 3689 times)

0 Members and 1 Guest are viewing this topic.

S6

  • Jr. Member
  • **
  • Posts: 81
display
« on: December 02, 2016, 06:21:25 AM »
Hi
Is it possible to have a CN digital display and a Oudie connected on a CN analog vario?
Thank you
Gilles

Lars

  • Newbie
  • *
  • Posts: 21
Re: display
« Reply #1 on: December 03, 2016, 02:21:49 AM »
Hi Gilles,
I have the following setup in my glider:
CNv pointer display and CNv NAV dispay - both connected to the CNv ADC via CAN bus connectors
My Oudie is connected to CNv via a the serial port on the CNv

Workes perfect  :)
/Lars

S6

  • Jr. Member
  • **
  • Posts: 81
Re: display
« Reply #2 on: December 03, 2016, 05:51:15 AM »
Well thank you Lars
Gilles

Evan Ludeman / T8

  • Administrator
  • Hero Member
  • *****
  • Posts: 1281
Re: display
« Reply #3 on: December 03, 2016, 08:17:09 AM »
Right.  ADC has two types of outputs, CANbus and serial port.  Right now, the CANbus is used exclusively to hook up vario displays, serial port is used exclusively to exchange data & commands with a flight computer.
Evan Ludeman / T8